Opius ACR-32 11.0mm- 50m       Product# SS-3140167050
Opius ACR-32 11.0mm- 100m    Product# SS-3140167100           

STEIN OPIUS ACR-32 – Static Line (No Termination)

OPIUS ACR-32 is a low stretch STATIC Line. OPIUS is ideal for use in rope access, fall safety systems, and rescue. OPIUS ACR-32 has a high proportion of sheath to cover ratio which provides improved abrasion protection and reduced sheath slippage

CE certified in the UK in accordance with EN1891 (Type “A”)

32-Strand STATIC Line
11.0mm Diameter
Light Weight
High Performance
Easy-grip supple feel
Excellent knot-holding capability
Excellent abrasion resistance
Controlled Extension
Protective coating
Serial numbered

Manufacturer STEIN

 GTIN/EAN13 5060483285610

Line Diameter 11.0mm

Length (m) 50, 100

Spliced Eye No

Sewn Eye No

Construction Kernmantle

Over Braid 32-Strand

Material (outer) Nylon

Material (inner) Nylon

Application SRT

Spliceability No

Standard EN1891 (A)

Product Care:

Failure to follow the rope care guidelines issued with the rope outlining the correct use and care may give rise to a situation that could endanger the user’s life. The manufacturer cannot be liable for the abuse or misuse of safety equipment. All risk is the responsibility of the user. A copy of the rope care guidelines can be downloaded from our website (see download section)

Sewn Eye Termination:

The Spliced Eye termination has been specifically designed to replace the need for creating a knotted termination in Low Stretch rope to which a connector can be attached. Low stretch lines are designed for use as general-purpose positioning, restraint & rescue lines. They are not for use in a personal fall arrest system and should always be used in conjunction with ascending, descending and safety hardware and devices for positioning work meeting relevant CE Standards.

Before Use:

Before use, a detailed risk assessment must be carried out by a competent person to establish that this is the correct product suitable for the type of work being undertaken; your anchor point conforms to industry standards and meets the requirements of CE EN795 (B), potential fall distance, obstructions, and rescue systems have been addressed. Purchasers and users should seek professional training from a fully qualified and competent instructor prior to engaging in any activity using this equipment. If you are not able, or not in a position to assume this responsibility, do not use this product. The manufacturer its distributors and retailers do not accept any liability if users do not follow the instructions correctly. Prior to each use a complete risk assessment must be carried out to ascertain that this product configures with and is appropriate to the work being undertaken.

Product Standard:

This product has been independently tested and certified to the BS EN1891:1998 Type A

Opius ACR-32 11.0mm Sewn Eye- 50m        Product# SS-3141167050         
Opius ACR-32 11.0mm Sewn Eye- 100m     Product# SS-3141167100          

STEIN OPIUS ACR-32 – Static Line (Sewn Eye)

OPIUS ACR-32 is a low stretch STATIC Line. OPIUS is ideal for use in rope access, fall safety systems, and rescue. OPIUS ACR-32 has a high proportion of sheath to cover ratio which provides improved abrasion protection and reduced sheath slippage

CE certified in the UK in accordance with EN1891 (Type “A”)

32-Strand STATIC Line
11.0mm Diameter
Light Weight
High Performance
Easy-grip supple feel
Excellent knot-holding capability
Excellent abrasion resistance
Controlled Extension
Protective coating
Serial numbered

Manufacturer STEIN

GTIN / EAN13 5060483285689

Line Diameter 11.0mm

Length (m) 50, 100

Spliced Eye No

Sewn Eye Yes

Construction Kernmantle

Over Braid 32-Strand

Material (outer) Nylon

Material (inner) Nylon

Application SRT

Spliceability No

Standard EN1891 (A)

Product Care:

Failure to follow the rope care guidelines issued with the rope outlining the correct use and care may give rise to a situation that could endanger the user’s life. The manufacturer cannot be liable for the abuse or misuse of safety equipment. All risk is the responsibility of the user. A copy of the rope care guidelines can be downloaded from our website (see download section)

Spliced Eye Termination:

The Spliced Eye termination has been specifically designed to replace the need for creating a knotted termination in Low Stretch rope to which a connector can be attached. Low stretch lines are designed for use as general-purpose positioning, restraint & rescue lines. They are not for use in a personal fall arrest system and should always be used in conjunction with ascending, descending and safety hardware and devices for positioning work meeting relevant CE Standards.

Before Use:

Before use, a detailed risk assessment must be carried out by a competent person to establish that this is the correct product suitable for the type of work being undertaken; your anchor point conforms to industry standards and meets the requirements of CE EN795 (B), potential fall distance, obstructions, and rescue systems have been addressed. Purchasers and users should seek professional training from a fully qualified and competent instructor prior to engaging in any activity using this equipment. If you are not able, or not in a position to assume this responsibility, do not use this product. The manufacturer its distributors and retailers do not accept any liability if users do not follow the instructions correctly. Prior to each use a complete risk assessment must be carried out to ascertain that this product configures with and is appropriate to the work being undertaken.

Product Standard:

This product has been independently tested and certified to the BS EN1891:1998 Standard in accordance with section 4.12.2 Static strength with terminations. Type A rope terminations are required to sustain a minimum force of 15kN for a minimum period of 3 minutes. (Tested in accordance with section 5.10 of the BS EN1891:1998 standard)

DECLARATION OF CONFORMITY

The manufacturer herewith declares that this product is in conformity with the provisions of the following:
Manufactured  by Fletcher Stewart (Stockport) Ltd
CE0321 | BS EN1891:1998
Article 10 of PPE Directive. Satra Technology Centre, Kettering, Northamptonshire NN16 8SG. ID number 0321.
Article 11 of PPE Directive. Satra Technology Centre, Kettering, Northamptonshire NN16 8SG. ID number 0321.

Acuda ACR-24 11.7mm – 35m     Product# SS-3133157035          
Acuda ACR-24 11.7mm – 45m     Product# SS-3133157045          
Acuda ACR-24 11.7mm – 60m     Product# SS-3133157060          

Special Orders Available

STEIN ACUDA ACR-24 – 20m Climbing Line with Spliced Eye Termination – Special Order Product

STEIN ACUDA ACR-24 is a performance 11.7mm braided construction climbing line manufactured with a 24-strand polyester over-braid and a braided nylon core. Specifically developed for the climbers looking for a performance climbing line.

ACUDA ACR-24 low weight offers more freedom and movement from that of traditional climbing lines. This line has exceptional performance characteristics when used in conjunction with popular arborist climbing systems and the braided construction helps improves grip for less hand fatigue without the added bulk of a larger diameter line.

Works exceptionally well with both traditional Friction Hitches and modern Mechanical Friction Devices used in both DRT climbing systems (double rope technique) or SRT (single rope technique)

CE certified in the UK in accordance with EN1891 (Type “A”)

24-Strand Kernmantle Construction
11.7mm Diameter
Light Weight
High Performance
Easy-grip supple feel
Excellent knot-holding capability
Splicable
Excellent abrasion resistance
Controlled Extension
Protective coating
Serial numbered terminations

Manufacturer STEIN

Line Diameter 12.4mm

Length (m) 35, 45, 60

Spliced Eye Yes

Sewn Eye N/A

Construction Kernmantle

Over Braid 16-Strand

Material (outer) Polyester

Material (inner) Polyester

Application DRT

Spliceability Yes

Standard EN1891 (A)

Product Care:

Failure to follow the rope care guidelines issued with the rope outlining the correct use and care may give rise to a situation that could endanger the user’s life. The manufacturer cannot be liable for the abuse or misuse of safety equipment. All risk is the responsibility of the user. A copy of the rope care guidelines can be downloaded from our website (see download section)

Spliced Eye Termination:

The Spliced Eye termination has been specifically designed to replace the need for creating a knotted termination in Low Stretch rope to which a connector can be attached. Low stretch lines are designed for use as general-purpose positioning, restraint & rescue lines. They are not for use in a personal fall arrest system and should always be used in conjunction with ascending, descending and safety hardware and devices for positioning work meeting relevant CE Standards.

Before Use:

Before use, a detailed risk assessment must be carried out by a competent person to establish that this is the correct product suitable for the type of work being undertaken; your anchor point conforms to industry standards and meets the requirements of CE EN795 (B), potential fall distance, obstructions, and rescue systems have been addressed. Purchasers and users should seek professional training from a fully qualified and competent instructor prior to engaging in any activity using this equipment. If you are not able, or not in a position to assume this responsibility, do not use this product. The manufacturer its distributors and retailers do not accept any liability if users do not follow the instructions correctly. Prior to each use a complete risk assessment must be carried out to ascertain that this product configures with and is appropriate to the work being undertaken.

Product Standard:

This product has been independently tested and certified to the BS EN1891:1998 Standard in accordance with section 4.12.2 Static strength with terminations. Type A rope terminations are required to sustain a minimum force of 15kN for a minimum period of 3 minutes. (Tested in accordance with section 5.10 of the BS EN1891:1998 standard)

DECLARATION OF CONFORMITY

The manufacturer herewith declares that this product is in conformity with the provisions of the following:
Manufactured  by Fletcher Stewart (Stockport) Ltd
CE0321 | BS EN1891:1998
Article 10 of PPE Directive. Satra Technology Centre, Kettering, Northamptonshire NN16 8SG. ID number 0321.
Article 11 of PPE Directive. Satra Technology Centre, Kettering, Northamptonshire NN16 8SG. ID number 0321.

Scorpius ACR-16 12.4mm – 15m     Product# SS-3115156015          
Scorpius ACR-16 12.4mm – 25m     Product# SS-3115156025          
Scorpius ACR-16 12.4mm – 35m     Product# SS-3115156035          
Scorpius ACR-16 12.4mm – 45m     Product# SS-3115156045          

Special Orders Available

STEIN SCORPIUS ACR-16 – Climbing Line with Spliced Eye Termination

STEIN SCORPIUS ACR-16 is a 16-Strand low stretch Kernmantle climbing line with excellent knot-holding capability and fully splicable.

SCORPIUS ACR-16 was designed as a traditional 16-strand climbing line with a diameter of 12.4mm. The durable 16 plait Polyester cover has an easy-grip supple feel whilst maintaining a maximum firmness; works exceptionally well with both traditional Friction Hitches and modern Mechanical Friction Devices used predominantly used in DRT climbing systems (double rope technique).

CE certified in the UK in accordance with EN1891 (Type “A”)

16-Strand Kernmantle Construction
12.4mm Diameter
Easy-grip supple feel
Excellent knot-holding capability
Splicable
Excellent abrasion resistance
Controlled Extension
Protective coating
Serial numbered terminations

Manufacturer STEIN

Line Diameter 12.4mm

Length (m) 15, 25, 35, 45

Spliced Eye Yes

Sewn Eye N/A

Construction Kernmantle

Over Braid 16-Strand

Material (outer) Polyester

Material (inner) Polyester

Application DRT

Spliceability Yes

Standard EN1891 (A)

Product Care:

Failure to follow the rope care guidelines issued with the rope outlining the correct use and care may give rise to a situation that could endanger the user’s life. The manufacturer cannot be liable for the abuse or misuse of safety equipment. All risk is the responsibility of the user. A copy of the rope care guidelines can be downloaded from our website (see download section)

Spliced Eye Termination:

The Spliced Eye termination has been specifically designed to replace the need for creating a knotted termination in Low Stretch rope to which a connector can be attached. Low stretch lines are designed for use as general-purpose positioning, restraint & rescue lines. They are not for use in a personal fall arrest system and should always be used in conjunction with ascending, descending and safety hardware and devices for positioning work meeting relevant CE Standards.

Before Use:

Before use, a detailed risk assessment must be carried out by a competent person to establish that this is the correct product suitable for the type of work being undertaken; your anchor point conforms to industry standards and meets the requirements of CE EN795 (B), potential fall distance, obstructions, and rescue systems have been addressed. Purchasers and users should seek professional training from a fully qualified and competent instructor prior to engaging in any activity using this equipment. If you are not able, or not in a position to assume this responsibility, do not use this product. The manufacturer its distributors and retailers do not accept any liability if users do not follow the instructions correctly. Prior to each use a complete risk assessment must be carried out to ascertain that this product configures with and is appropriate to the work being undertaken.

Product Standard:

This product has been independently tested and certified to the BS EN1891:1998 Standard in accordance with section 4.12.2 Static strength with terminations. Type A rope terminations are required to sustain a minimum force of 15kN for a minimum period of 3 minutes. (Tested in accordance with section 5.10 of the BS EN1891:1998 standard)

DECLARATION OF CONFORMITY

The manufacturer herewith declares that this product is in conformity with the provisions of the following:
Manufactured  by Fletcher Stewart (Stockport) Ltd
CE0321 | BS EN1891:1998
Article 10 of PPE Directive. Satra Technology Centre, Kettering, Northamptonshire NN16 8SG. ID number 0321.
Article 11 of PPE Directive. Satra Technology Centre, Kettering, Northamptonshire NN16 8SG. ID number 0321.

Razor Rope Cutter   Product# SS-4900150001        
         

Deigned to easily cut Polyester or Nylon ropes up to 20mm in diameter.

The blade is a high quality Trimming Blade as used in Stanley Knife style cutters.

To make a clean cut simply wrap some tape around the rope at the point at which you wish to make your cut.

 

Cannot be used on technical ropes made from Dyneema or Tecnora

Manufacturer STEIN

GTIN / EAN13     5060483280288

 

Product Care:

Failure to follow the rope care guidelines issued with the rope outlining the correct use and care may give rise to a situation that could endanger the user’s life. The manufacturer cannot be liable for the abuse or misuse of safety equipment. All risk is the responsibility of the user. A copy of the rope care guidelines can be downloaded from our website (see download section)

Spliced Eye Termination:

The Spliced Eye termination has been specifically designed to replace the need for creating a knotted termination in Low Stretch rope to which a connector can be attached. Low stretch lines are designed for use as general-purpose positioning, restraint & rescue lines. They are not for use in a personal fall arrest system and should always be used in conjunction with ascending, descending and safety hardware and devices for positioning work meeting relevant CE Standards.

Before Use:

Before use, a detailed risk assessment must be carried out by a competent person to establish that this is the correct product suitable for the type of work being undertaken; your anchor point conforms to industry standards and meets the requirements of CE EN795 (B), potential fall distance, obstructions, and rescue systems have been addressed. Purchasers and users should seek professional training from a fully qualified and competent instructor prior to engaging in any activity using this equipment. If you are not able, or not in a position to assume this responsibility, do not use this product. The manufacturer its distributors and retailers do not accept any liability if users do not follow the instructions correctly. Prior to each use a complete risk assessment must be carried out to ascertain that this product configures with and is appropriate to the work being undertaken.

Product Standard:

This product has been independently tested and certified to the BS EN1891:1998 Standard in accordance with section 4.12.2 Static strength with terminations. Type A rope terminations are required to sustain a minimum force of 15kN for a minimum period of 3 minutes. (Tested in accordance with section 5.10 of the BS EN1891:1998 standard)

DECLARATION OF CONFORMITY

The manufacturer herewith declares that this product is in conformity with the provisions of the following:
Manufactured  by Fletcher Stewart (Stockport) Ltd
CE0321 | BS EN1891:1998
Article 10 of PPE Directive. Satra Technology Centre, Kettering, Northamptonshire NN16 8SG. ID number 0321.
Article 11 of PPE Directive. Satra Technology Centre, Kettering, Northamptonshire NN16 8SG. ID number 0321.