CE Certified Sewn Prusik Loop 50cm     Product# SS-3740121050          
CE Certified Sewn Prusik Loop 65cm     Product# SS-3740121065          

The prusik loop has been around for many years and still proves to be a vital piece of climbing kit for many people. These loops have many uses in both climbing and rigging scenarios.

STEIN Prusik Loops are available either as a Tied Version or Sewn Version and fully CE certified in the UK under the PPE regulation (EU) 2016/425

Manufactured from STEIN ATOL Accessory Cord a hard wearing 9.0mm 16 plait Polyester braided cover over a Polyester core. This accessory cord has an Average Break Load (ABL) of 2250kg.

Polyester accessory cords require rigorous inspection on a regular basis before, during, and after each climb.

Manufacturer STEIN

GTIN / EAN13 5060483288680

Application PPE

EWL Length 50cm, 65cm

Diameter (mm) 9

Material (outer) Polyester

Material (inner) Polyester

Construction Double Braid

Over Braid 16-Strand

Application DRT

Standard EN566/EN795 (B)

Product Care:

Failure to follow the rope care guidelines issued with the rope outlining the correct use and care may give rise to a situation that could endanger the user’s life. The manufacturer cannot be liable for the abuse or misuse of safety equipment. All risk is the responsibility of the user. A copy of the rope care guidelines can be downloaded from our website (see download section)

Before Use:

Before use, a detailed risk assessment must be carried out by a competent person to establish that this is the correct product suitable for the type of work being undertaken; your anchor point conforms to industry standards and meets the requirements of CE EN795 (B), potential fall distance, obstructions, and rescue systems have been addressed. Purchasers and users should seek professional training from a fully qualified and competent instructor prior to engaging in any activity using this equipment. If you are not able, or not in a position to assume this responsibility, do not use this product. The manufacturer its distributors and retailers do not accept any liability if users do not follow the instructions correctly. Prior to each use a complete risk assessment must be carried out to ascertain that this product configures with and is appropriate to the work being undertaken.

Product Standard:

CE certified in the UK under the PPE regulation (EU) 2016/425 to EN795(B)

STEIN ATOL Cord has been independently tested to CE EN564 Mountaineering equipment – Accessory cord. The EN564 standard however only allows for full Certification of cord up to 8mm in diameter! 

STEIN ATOL 9mm Friction Cord 5m     Product# SS-3240973005          

STEIN ATOL Accessory Cord has a hard wearing 16 plait Polyester cover with a braided Polyester core. ATOL is ideal for use as a prusik and other friction hitches, offering easy knot tying and good grip due to its anti-kink construction. 

ATOL 9mm accessory cord is manufactured to meet CE EN564 Mountaineering equipment – Accessory cord. The EN564 standard however only allows for full Certification of cord up to 8mm in diameter! 

This accessory cord has an Average Break Load (ABL) 2250kg

Polyester accessory cords require rigorous inspection on a regular basis before, during, and after each climb.

Manufacturer STEIN

GTIN / EAN13 5060483283326

Line Diameter 9.0mm

Length (m) 50

Spliced Eye No

Sewn Eye No

Construction Double Braid

Over Braid 16-Strand

Material (outer) Polyester

Material (inner) Polyester

Application No

Spliceability Yes

Standard Tested To Conform To EN564

Product Care:

Failure to follow the rope care guidelines issued with the rope outlining the correct use and care may give rise to a situation that could endanger the user’s life. The manufacturer cannot be liable for the abuse or misuse of safety equipment. All risk is the responsibility of the user. A copy of the rope care guidelines can be downloaded from our website (see download section)

Before Use:

Before use, a detailed risk assessment must be carried out by a competent person to establish that this is the correct product suitable for the type of work being undertaken; your anchor point conforms to industry standards and meets the requirements of CE EN795 (B), potential fall distance, obstructions, and rescue systems have been addressed. Purchasers and users should seek professional training from a fully qualified and competent instructor prior to engaging in any activity using this equipment. If you are not able, or not in a position to assume this responsibility, do not use this product. The manufacturer its distributors and retailers do not accept any liability if users do not follow the instructions correctly. Prior to each use a complete risk assessment must be carried out to ascertain that this product configures with and is appropriate to the work being undertaken. 

All friction knots have different characteristics subject to the type of rope used, the number of wraps used, and the condition of the rope. Anyone intending to use friction knots should be fully aware of their individual characteristics, how they are tied correctly, and the safety factors relating to using friction knots.

Product Standard:

This product has been independently tested to CE EN564 Mountaineering equipment – Accessory cord. The EN564 standard however only allows for full Certification of cord up to 8mm in diameter! 

STEIN COPIOUS ATOL Sewn Eye 9mm Friction Cord 75cm     Product# SS-3242073075          

Many climbers are now realising and understanding the virtues of working on more technical friction hitches. Many of these hitches require friction cords with different properties and to have a sewn termination to allow the hitch to be dressed on the hardware correctly

Manufacturer STEIN

GTIN / EAN13 5060483285344

Application PPE

EWL Length 75cm

Diameter (mm) 9

Material (outer) Polyester

Material (inner) Polyester

Construction Double Braid

Applicable Standards No

Standard EN564

Product Care:

Failure to follow the rope care guidelines issued with the rope outlining the correct use and care may give rise to a situation that could endanger the user’s life. The manufacturer cannot be liable for the abuse or misuse of safety equipment. All risk is the responsibility of the user. A copy of the rope care guidelines can be downloaded from our website (see download section)

Before Use:

Before use, a detailed risk assessment must be carried out by a competent person to establish that this is the correct product suitable for the type of work being undertaken; your anchor point conforms to industry standards and meets the requirements of CE EN795 (B), potential fall distance, obstructions, and rescue systems have been addressed. Purchasers and users should seek professional training from a fully qualified and competent instructor prior to engaging in any activity using this equipment. If you are not able, or not in a position to assume this responsibility, do not use this product. The manufacturer its distributors and retailers do not accept any liability if users do not follow the instructions correctly. Prior to each use a complete risk assessment must be carried out to ascertain that this product configures with and is appropriate to the work being undertaken. 

All friction knots have different characteristics subject to the type of rope used, the number of wraps used, and the condition of the rope. Anyone intending to use friction knots should be fully aware of their individual characteristics, how they are tied correctly, and the safety factors relating to using friction knots.

Product Standard:

This product has been independently tested to CE EN564 Mountaineering equipment – Accessory cord. The EN564 standard however only allows for full Certification of cord up to 8mm in diameter! 

STEIN COPIOUS TEC Sewn Eye 10mm Friction Cord 75cm     Product# SS-1EB0075          

Made from YALE Beeline

Many climbers are now realising and understanding the virtues of working on more technical friction hitches. Many of these hitches require friction cords with different properties and to have a sewn termination to allow the hitch to be dressed on the hardware correctly

Manufacturer STEIN

GTIN / EAN13 5060483283869

Application PPE

EWL Length 75cm

Diameter (mm) 10

Material (outer) Polyester/Technora Blend

Material (inner) Polyester

Construction Double Braid

Applicable Standards No

Standard EN795 (B)

Product Care:

Failure to follow the rope care guidelines issued with the rope outlining the correct use and care may give rise to a situation that could endanger the user’s life. The manufacturer cannot be liable for the abuse or misuse of safety equipment. All risk is the responsibility of the user. A copy of the rope care guidelines can be downloaded from our website (see download section)

Before Use:

Before use, a detailed risk assessment must be carried out by a competent person to establish that this is the correct product suitable for the type of work being undertaken; your anchor point conforms to industry standards and meets the requirements of CE EN795 (B), potential fall distance, obstructions, and rescue systems have been addressed. Purchasers and users should seek professional training from a fully qualified and competent instructor prior to engaging in any activity using this equipment. If you are not able, or not in a position to assume this responsibility, do not use this product. The manufacturer its distributors and retailers do not accept any liability if users do not follow the instructions correctly. Prior to each use a complete risk assessment must be carried out to ascertain that this product configures with and is appropriate to the work being undertaken. 

All friction knots have different characteristics subject to the type of rope used, the number of wraps used, and the condition of the rope. Anyone intending to use friction knots should be fully aware of their individual characteristics, how they are tied correctly, and the safety factors relating to using friction knots.

Product Standard:

This product has been independently tested to CE EN564 Mountaineering equipment – Accessory cord. The EN564 standard however only allows for full Certification of cord up to 8mm in diameter! 

STEIN COPIOUS ARMOUR TAC Sewn Eye 8mm Friction Cord 70cm     Product# SS-1EM0070          
STEIN COPIOUS ARMOUR TAC Sewn Eye 8mm Friction Cord 75cm     Product# SS-1EM0075          

Made from STEIN ARMOUR TAC

Many climbers are now realising and understanding the virtues of working on more technical friction hitches. Many of these hitches require friction cords with different properties and to have a sewn termination to allow the hitch to be dressed on the hardware correctly

Manufacturer STEIN

GTIN / EAN13 5060483283883, 5060483283890

Application PPE

EWL Length 70cm, 75cm

Diameter (mm) 8

Material (outer) Polyester/Technora Blend

Material (inner) Polyurethane coated Dyneema SK75

Construction Double Braid

Applicable Standards No

Standard EN795 (B)

Product Care:

Failure to follow the rope care guidelines issued with the rope outlining the correct use and care may give rise to a situation that could endanger the user’s life. The manufacturer cannot be liable for the abuse or misuse of safety equipment. All risk is the responsibility of the user. A copy of the rope care guidelines can be downloaded from our website (see download section)

Before Use:

Before use, a detailed risk assessment must be carried out by a competent person to establish that this is the correct product suitable for the type of work being undertaken; your anchor point conforms to industry standards and meets the requirements of CE EN795 (B), potential fall distance, obstructions, and rescue systems have been addressed. Purchasers and users should seek professional training from a fully qualified and competent instructor prior to engaging in any activity using this equipment. If you are not able, or not in a position to assume this responsibility, do not use this product. The manufacturer its distributors and retailers do not accept any liability if users do not follow the instructions correctly. Prior to each use a complete risk assessment must be carried out to ascertain that this product configures with and is appropriate to the work being undertaken. 

All friction knots have different characteristics subject to the type of rope used, the number of wraps used, and the condition of the rope. Anyone intending to use friction knots should be fully aware of their individual characteristics, how they are tied correctly, and the safety factors relating to using friction knots.

Product Standard:

This product has been independently tested to CE EN564 Mountaineering equipment – Accessory cord. The EN564 standard however only allows for full Certification of cord up to 8mm in diameter!