STEIN Invert-A-Wrap LD750     Product# SS-LD0750          

The Invert-A-Wrap is a lightweight and compact rope friction device. Designed to be used in either orientation and has a working load limit (WLL) of 750kg ideal for lowering timber in a controlled manner.  This device will accommodate up to 13mm rigging lines. Fitted as standard with a tree protection rubber which can easily be replaced or removed.

Manufacturer STEIN

GTIN / EAN13 5060483281155

Style Floating

Working Load Limit (WLL) KG 750

Maximum Rope Size 13mm

Bollard Diameter mm 51

Finish Plated

Basic Weight KG 2.0

Serial Number Yes

STEIN Floating Lowering Device RC1000     Product# SS-RC1000          

STEIN RC1000 Floating Lowering Device 1000kg WLL

Working ropes can easily be wrapped and unwrapped without removing the RC-1000 or RC-2000 from either its main anchor point or the top attachment point. The bottom anchor point has a large eye to accommodate a choked sling. The top attachment point makes for more convenient routing of the working rope as well as tensioning the rope, this also allows for Rapid-Slack-Removal in ropes whilst blocking down logs – a first in floating/hanging devices. The top attachment point is also designed for retaining the device in place whilst fixing the base anchor point securely and for attaching a tensioning or lifting system.

Manufacturer STEIN

GTIN / EAN13 5060483281162

Style Floating

Working Load Limit (WLL) KG 1000

Maximum Rope Size 14mm

Bollard Diameter mm 61

Finish Plated

Basic Weight KG 3.6

Serial Number Yes

STEIN Floating Lowering Device RC2000     Product# SS-RC2000          

STEIN RC2000 Floating Lowering Device 2000kg WLL

Working ropes can easily be wrapped and unwrapped without removing the RC-1000 or RC-2000 from either its main anchor point or the top attachment point. The bottom anchor point has a large eye to accommodate a choked sling. The top attachment point makes for more convenient routing of the working rope as well as tensioning the rope, this also allows for Rapid-Slack-Removal in ropes whilst blocking down logs – a first in floating/hanging devices. The top attachment point is also designed for retaining the device in place whilst fixing the base anchor point securely and for attaching a tensioning or lifting system.

Manufacturer STEIN

GTIN / EAN13 5060483281179

Style Floating

Working Load Limit (WLL) KG 2000

Maximum Rope Size 16mm

Bollard Diameter mm 76

Finish Plated

Basic Weight KG 6.2

Serial Number Yes

STEIN Lowering Device RC2001     Product# SS-RC2001          

STEIN RC2001 Fixed Lowering Device 2000kg WLL

The RC-2001 is a medium duty single bollard lowering device. Weighing in at just over 5kg it can easily be mounted by one person by utilizing the top attachment point as a suspension point. Attached to the tree using a specially designed 5m 5t ratchet strap with 50mm webbing and backed up by securing a choked sling to the base anchor point. Fitted with the same diameter drum as the RC2000 this device can be used with working ropes up to 16mm and has a working load limit of up to 2000kg (subject to mounting type)

Manufacturer STEIN

GTIN / EAN13 5060483281186

Style Fixed

Working Load Limit (WLL) KG 2000

Maximum Rope Size 16mm

Bollard Diameter mm 76

Finish Plated

Basic Weight KG 5.8

Serial Number Yes

STEIN Lowering Device RCW3001     Product# SS-RCW3001          

Since its launch in 2009 the STEIN RC3001 has proven to be one of the most respected, sought after lowering bollards on the market, used and trusted the world over.

For 2015 it has been upgraded to allow a Winch System to be fitted and will now be known as the RCW-3001. Without compromising the integrity and features users have come to trust, the RCWINCH can be easily attached and detached during use without affecting the working line or the products performance.

Not all rigging jobs require the facility of lifting capability! This simple option now allows the operator to use the bollard independently of the winch and should a lifting process be required the winch can be attached within seconds with no tools required. The RCWINCH can also be integrated into the system during a lowering procedure should it be required.

Unlike other Winch Style Bollards the RCWINCH does not support the load during a lowering procedure; the load is supported on the bollard as the winch is attached to the lowering line independently through a friction hitch and winch line. This allows the load to be fully supported on the bollard and not the winch. Once the load has been winched to its desired position, the full weight is then easily transferred to the main rigging line, by reversing the winch and separating the two lines. At which point the suspended load can be safely lowered, independently and unimpeded by the winch.

Although weighing in excess of 13kg excluding the winch and mounting straps it can be easily mounted by one person by utilizing the top attachment point as a suspension point and simply attaching the winch in seconds once the device is mounted.

The large diameter drum easily accommodates working lines up to 19mm and has a working load limit of up to 3000kg (subject to mounting type). The drum has two sets of rope guides (fairleads) specially angled at 45-degrees which allows the operator to quickly add or subtract wraps.

A specially designed ratchet strap with waterproof webbing securely attaches the device to the tree and can be backed up by securing an Anchor-Sling to the base anchor point. Supplied as standard with two heavy duty rubber inserts for use when tree protection is required.

The RCW-3001 is probably the most user friendly and flexible Winching Bollard on the market to date.

The RCW-3001 & RCWINCH can be purchased as separate components or as a combination set SS-RCW3001-KIT

Kit Contains the following items:

1 x RCW-3001 Lowering Device
1 x 10t Ratchet Handle (RC-P5000)
1 x 5.8m Webbing (RC-P5001)
1 x Pair of Protection Rubbers (RC-P5006)

OPTIONAL WINCH ATTACHMENT AVAILABLE SS-RCWINCH

Manufacturer STEIN

GTIN / EAN13 5060483281193

Style Fixed

Working Load Limit (WLL) KG 3000

Maximum Rope Size 19mm

Bollard Diameter mm 115

Finish Plated & Powder Coated

Basic Weight KG 13.3

Serial Number Yes

STEIN Winch Kit for RCW3001     Product# SS-RCWINCH          

STEIN Winch kit to fit RCW3001

The RCWINCH is a rugged constructed brake winch designed to work in conjunction with the RCW-3001 bollard. The RCWINCH can be easily attached and detached to the RCW-3001 during use without affecting the working line or the products performance.

The automatic load-actuated brake ensures the load remains suspended if the crank handle is released and avoids an unchecked descent of the load; the load however should always be backed up on the bollard during any lifting operation. This system has a maximum rated capacity of 681kg operating on a 5.4:1 gear ratio.

The RCWINCH is supplied with a custom made 5m Winch Line.

This product will only fit the RCW-3001 and cannot be fitted to its predecessor the RC3001.

  • High quality rugged compact braked winch
  • Gears and brakes fully covered to prevent dust, dirt and rain contamination
  • Finished in high quality zinc coating offering excellent corrosion protection
  • Automatic load-actuated brake can hold the load in position
  • Heat treated gears
  • Very low operator effort required for easy operation
  • Only for static load lifting
  • NEVER SUBJECT THE  RCWINCH TO DYNAMIC LOADING
  • Always read the User Manual before use
  • Made in the USA

Manufacturer STEIN

GTIN / EAN13 5060483281216

 

STEIN Top Mounting Strap     Product# SS-RCP6004          

Top Mounting Strap for RC Devices

This 5.0m webbing strap helps position the RC Device whilst afixing it to the desired mounting point. Made from 25mm webbing and fitted with a simple cam adjuster. Supplied with a STEIN SS-1H0003 Karabiner

Manufacturer STEIN

GTIN / EAN13 5060483281292